FMN WZ FSE 2-2, Инструкция по эксплуатации, Страница: 25 / 52

24 25
6. Maintenance
The unit can be operated without maintenance.
7. Troubleshooting
7.1 Messages in normal output mode
The WZ FSE is connected to the terminal program via serial interface.
Error message Description
OK Command is valid and has been executed correctly
ERROR Command is valid but could not be executed correctly
CMD-ERROR Command is invalid
Table 7-1: Normal output mode (“ ?E 0“)
7.2 Messages in extended output mode
The WZ FSE is connected to the terminal program via serial interface.
Input Output
Activating the extended output mode
?E
1
+ENTER
Message Value range Description
OK Command is valid and has been correctly executed
CMD-ERROR Command is invalid
RX OK Programming of RX channel was successful
TX OK Programming of TX channel was successful
PWR OK Programming of power level was successful
ERROR XX XX = 00 ... FF Command is valid but has not been correctly executed
RX ERROR XX XX = 00 ... FF Error when programming the RX channel
TX ERROR XX XX = 00 ... FF Error when programming the TX channel
PWR
ERROR XX XX = 00 ... FF Error when programming the power level
Table 7-2: Extended output mode (“ ?E 1“)
see chapter 7.4 Explanation of the error messages in the extended output mode .
Maintenance / Troubleshooting