FMN alpha open air, Инструкция по эксплуатации

Страница: 7 / 12

6
7
Telephone with 4 destination dialling keys
5. Settings
The alpha open air needs to be opened in order to be able to make settings and
program the destination dialling keys (remove the front panel from the casing by
unscrewing the 4 Security-TORX screws).
5.1 Notes
l
The destination dialling memories are automatically cleared if the operation
mode is changed. They need to be programmed anew if required.
l
According to point 5.2.5, the telephone will be in working condition if the
destination dialling key 1 (or A see drawing 3) is programmed with a
call number.
l
Changes of settings become effective by replacing the handset.
l
The telephone can only be programmed when it is connected to the
telephone line.
l
The Set key can be pressed by using a small screw driver or a similar tool.
l
All settings remain when the telephone is disconnected from the
telephone line.
l
Important: This telephone does not have a ringer, also pulse dialling, ground
and last number redial are not possible.
5.2 Telephone with 4 destination dialling keys
Description of the operating panel: telephone with 4 destination dialling keys
Destination
dialling key 4
(Flash key)
Destination
dialling key 1
Back view of main board with cover
Drawing 4
12
to hook switch
telephone connecting
cord
1
2
3
4
Set key
Destination
dialling key 2
Destination
dialling key 3
1 2
3
A
B
6 5 4
7 8 9
0
C
D
ABC DEF
MNO JKL GHI
PQRS TUV WXYZ
5.2.1 Default setting
l
Analogue standard telephone with DTMF dialling without reservation
l
4 destination dialling memories with a maximum of 20 digits each (empty)
5.2.2 Normal telephone function (default setting)
Dialling and communication is possible without reservation.
If your telephone is set in accordance with points 5.2.3 - 5.2.5, you can reset it to
normal telephone function (default setting) as follows: