FMN alpha open air, Инструкция по эксплуатации

Страница: 5 / 12

4
5
3.2 Mounting on a wall with the cable leading through the back panel of
the casing
1. Mark 4 fixing points and the drilling for the cable leading (back panel) on the wall
according to drawing 1 or the drilling template (see last page of instructions).
2. For mounting on a solid wall: drill holes into the marked fixing points and put
dowels into the drilled holes (e. g. 8 mm dowels);
for mounting on a wood wall etc.: drill holes
∅
4 mm into the marked fixing points.
3. Cable entry on the back panel: drill a hole (min. ∅ 6 mm) into the marked point.
4. Take the alpha open air out of the packaging. Remove the front panel from the
back compartment by loosening the 4 Security-TORX screws (tool: offset screw
driver). Unplug the connector of the handset and the telephone connecting cord
from the main board (PCB), lay the front panel aside.
5. Remove the connecting cord by unscrewing the 2 pin screw terminal, pull the cord
out of the ferrite ring, the protection sleeve remains in the casing. Pull the connect-
ing cord through the drill hole in the fixing panel and through the protection sleeve
in the back panel. Pull the cord twice through the ferrite ring and screw it back onto
the 2 pin screw terminal.
6. Fix the back compartment of the casing to the wall using the 4 hexagon head wood
screws supplied each together with one steel and one plastic washer (for sealing
purposes).
Drawing 1
ø
8
ap
pr
ox
.1
20
0
120
12
4
le
Drilling
or cab
entry
f
min. d
iamete
r 6mm
30
44
Ferrite ring
Mounting
Dimensions with
protection-frame:
height: 332 mm
(without handset cord)
width: 326 mm
depth: 130mm (with handset)
Dimensions without
protection-frame:
height: 260 mm
(without handset cord)
width: 250 mm
depth: 130mm (with handset)