10
11
Telephone with automatic direct station selection / Connection permit
Drawing 6
1
2
3
F
4
5
6
E
7
8
9
D
A
0
B
C
keypad key F
key E
Back view of main board
Description of the operating panel
5.3.1 Default setting
l
telephone with automatic direct station selection - DTMF dialling
l
1 destination dialling memory with a maximum of 20 digits,
(the memory is empty or preprogrammed by default with a call number
(option))
5.3.2 Programming the destination dialling key
- remove the front panel (see drawing 5)
- lift the handset
- press key E of the keypad located on the back of the front panel (see drawing 6)
- press key F of the keypad (= destination dialling key)
- enter number (previously programmed call numbers will be overwritten)
- press key E of the keypad
- replace the handset after fixing the front panel to the back compartment.
6. Connection permit
This telephone is designed for connection to analogue telephone lines (analogue
access with standard requirements) of the public telecommunications network. It may
be connected and operated by any person.
The telephone is compliant with the harmonized standards for connection to public
telecommunications networks.
This, however, is no guarantee for successful operation of the telephone unit on each
network termination point due to the differences in the public telecommunications
network between the different countries.
For operating problems, contact your specialist dealer.
Содержание alpha open air
Страница 1: ...1 Instructions for use alpha open air...
