www.fmiproducts.com
112127-01E
17
BURNER SYSTEM ASSEMBLY
Continued
Figure 21 - Installing Burner System Into
Cast Iron Stove Body
LO
H
I
P
ILO
T
O
FF
ON
Cast Iron
Stove Body
Burner
System
Center Top Grate
(Included with Cast
Iron Stove Body
Figure 22 - Attaching Rear Cover and
Bottom Cover from Stove Body
Rear Cover
Hex Screws
Mounting
Screws
Bottom Cover
Figure 23 - Removing Glass Door from
Burner System
LO
H
I
P
IL
OT
O
FF
O
N
Screw
Glass Door
REMOVING/REPLACING GLASS
DOOR
Cast Iron
Stove Body
Cast Iron
Stove Body
CAUTION: Do not operate
this burner system with a bro
-
ken glass door panel or without
the glass door panel securely
in place. For replacement part
information see
Replacement
Parts
, page 29.
1. Use reverse directions for installing rear
cover page 16. Remove stove insert from
cast body.
2. Remove screws from 2 tabs at top of glass
door while holding door securely keeping
it from falling forward (see Figure 23).
3. Grasp door by both sides and ease it up-
ward off of lower bracket (see Figure 23).
4. To replace glass door, follow the above
instructions in reverse.
