www.fmiproducts.com
125568-01A
21
Figure 30 - Installing Front Top Log
INSTALLATION
Continued
Figure 31 - Installing Back Top Log and
Final Assembly
Figure 31A - Installing Back Top Log,
Top View
Front Top Log (D-024)
Rectangular
Peg
Right Split
Crossover
Log (D-022)
Middle Split Log
Right Split
Crossover
Log (D-022)
Back Top Log
(D-023 or D029)
Log Notch
Figure 28A - Installing Middle Split Log
Rear Top Side View
Figure 29 - Installing Right Split
Crossover Log
Right Split Crossover
Log (D-022)
Right Front
Log)
Square Peg
Burner Tube
Find the right split crossover log (D-022)
6.
The bottom of the log has a rectangular
shape that fits in the rectangular slots on
the right side of the front right log and the
middle split log. Place this log as shown
in Figure 29.
Find the front top log (D-024). See Figure
7.
30. The left end of this log has a square hole
that fits over a square peg that is on the top
of the middle split log. The right end of this
log rests against the knot on the top of the
front right log and also rests on top of the
right split crossover log.
Find the back top log (LMF-SC: D-023 or
8.
LMF48-SC: D029).See Figures 31, and
31A. The left end of this log has a round
hole that fits over a round peg that is on
the top of the back left log. The right end
of this log has a rectangular hole that fits
over a rectangular peg on the top of the
right crossover log.
