www.fmiproducts.com
125568-01A
22
EMBER PLACEMENT
INSTALLATION
Continued
Figure 33 - Placement of Rock Wool (shown with Platinum Bright Embers)
Figure 32 - Platinum Bright Embers
Rock Wool
Flat Front Burner
Ember Material
WARNING: Do not use any
other ember material not sup-
plied with this unit.
WARNING: Do not operate unit
without ember material correctly
in place as shown in Figures 32
& 33. Do NOT place ember mate-
rial anywhere else on the unit.
Use only ember material supplied
with unit. Excessive or incorrectly
placed ember material may pro-
duce carbon monoxide or soot.
LAVA ROCK PLACEMENT
Rock Wool placement.
•
Place rock wool
material on front flat burner in areas away
from ports as shown in Figure 33.
Add lava rock; Lava rock may cover 1/2
•
inch of the front burner(flat metal ember
pan burner) but shall not be allowed to
come in contact with either the burner
ports or flame around base of heater if de
-
sired.
DO NOT place rock or additional
logs on front burner or on logs except
as directed above.
Placing any material
on unit other than ember material on front
burner may result in production of carbon
monoxide or soot. A switch log is included
with each log set. This log is designed to
house a switch on remote ready models.
On variable remote models, this switch
is not needed. The log can be placed on
the floor of the fireplace to enhance the
look of the log set. Use lava rock to hide
wires from switch/log to control valve.
Place switch/log so the switch is easy
to access.
Two ember materials are supplied with
•
this log set. Platinum Bright Embers give
a bright glow appearing as hot coals.
Should embers need replacing, see
Ac-
cessories
, page 40.
•
Platinum Bright Ember placement.
Add embers to front, flat burner. Gently
remove embers from bag. Separate
pieces of ember material and place on
surface of flat burner just behind hori
-
zontal ports as shown in Figure 32.
