www.fmiproducts.com
125795-01B
19
INSTALLATION
Continued
2. Find the back left log (LMF36-SC and
VFGT24 inch models: D-060 or LMF42-
SC and VFGT30 inch models: D-018 or
LMF48-SC and VFGT36 inch models:
D-026). See Figures 29, 29A, and 29B.
Figure 29A shows how the log must fit
against the end of the burner. Figure 29B
shows how the notch in log fits against the
vertical portion of the burner tube. Place
this log on the base assembly by inserting
it from the left side as shown in Figure 19.
You will need to twist the log slightly to get
it to fit against the burners properly. It will
rest even with the back edge of the pan.
Figure 28C - Installing Right Front Log,
Side View
Figure 29 - Installing Back Left Log
Back Left Log (D-060,
D-018 or D026)
Flat Part of Log
Log Notch
Burner Tube
Figure 29A - Installing Back Left Log
Figure 29B - Installing Back Left Log
(D-018) Rear View
Burner
Tube
Log
Notch
Vertical Portion of Burner Tube
3. Find the front left log (LMF36-SC and
VFGT24 inch models: D-059 or LMF42-
SC and VTGF30 inch models: D-017 or
LMF48-SC and VFGT36 inch models:
D-025). See Figures 30, 30A, and 30B.
The log has a rectangular stand off on
the bottom that fits against the lip on the
black metal base as shown in figure 30A.
The bottom of this log has a slot that fits
over the second bar on the grate as shown
in Figure 30B, page 20. Place the log on
the base assembly as shown in figures.
Figure 30 - Installing Front Left Log
Front Left Log (D-059,
D-017 or D025)
Figure 30A - Installing Front Left Log
Side View
Grate Fingers