www.fmiproducts.com
124702-01B
24
TROUBLESHOOTING
:$51,1*7XUQRIIKHDWHUDQGOHWFRROEHIRUHVHUYLFLQJ2QO\D
TXDOL¿HGVHUYLFHSHUVRQVKRXOGVHUYLFHDQGUHSDLUKHDWHU
&$87,211HYHUXVHDZLUHQHHGOHRUVLPLODUREMHFWWRFOHDQ
2'6SLORW7KLVFDQGDPDJH2'6SLORWXQLW
Note: All troubleshooting items are listed in order of operation.
3266,%/(&$86(
1. Ignitor electrode not con-
nected to ignitor cable
2. Ignitor cable pinched or
ZHW
3LH]RLJQLWRUQXWLVORRVH
4. Broken ignitor cable
%DGSLH]RLJQLWRU
6. Ignitor electrode positioned
ZURQJ
7. Ignitor electrode broken
1. Gas supply turned off or
equipment shutoff valve
closed
2. Control knob not in PILOT
position
3. Control knob not pressed in
ZKLOHLQ3,/27SRVLWLRQ
$LU LQ JDV OLQHV ZKHQ LQ
-
stalled
5. Depleted gas supply (pro-
pane/LP only)
6. ODS/pilot is clogged
7. Gas regulator setting is not
correct
REMEDY
1. Reconnect ignitor cable
2. Free ignitor cable if pinched
by any metal or tubing.
.HHSLJQLWRUFDEOHGU\
7LJKWHQ QXW KROGLQJ SLH]R
ignitor to base panel of log
set. Nut is located behind
base panel
4. Replace ignitor cable
5HSODFHSLH]RLJQLWRU
6. Replace pilot assembly
7. Replace pilot assembly
1. Turn on gas supply or open
equipment shutoff valve
2. Turn control knob to PILOT
position
3UHVVLQFRQWURONQREZKLOH
in PILOT position
&RQWLQXH KROGLQJ GRZQ
control knob. Repeat ignit-
ing operation until air is
removed
5. Contact local propane/LP
gas company
6. Clean ODS/pilot (see
Cleaning and Maintenance
page 21) or replace ODS/
pilot assembly
7. Replace gas regulator
2%6(59('352%/(0
When ignitor button is
SUHVVHG WKHUH LV QR VSDUN
at ODS/pilot
When ignitor button is
SUHVVHG WKHUH LV VSDUN DW
ODS/pilot but no ignition
