FMI GWN10A Скачать руководство пользователя

Страница: 1 / 24

For more information, visit www.fmiproducts.com

WARNING: If the information in this manual is not

followed exactly, a fire or explosion may result causing

property damage, personal injury or loss of life.
— Do not store or use gasoline or other flammable

vapors and liquids in the vicinity of this or any other

appliance.

— WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any

phone in your building.

• Immediately call your gas supplier from a neighbor’s

phone. Follow the gas supplier’s instructions.

• If you cannot reach your gas supplier, call the fire

department.

— Installation and service must be performed by a quali-

fied installer, service agency or the gas supplier.

INSTALLER: Leave this manual with the appliance.

CONSUMER: Retain this manual for future reference.

VENT-FREE GAS HEATER

SAFETY INFORMATION AND INSTALLATION MANUAL

MODELS

GWN10A, GWP10A,

GWN10TA, GWP10TA,

VSHN10M, VSHP10M,

VSHN10T, VSHP10T

PFS

Содержание GWN10A

























Результаты поиска

Содержание GWN10A

Отзывы:

Похожие инструкции для GWN10A

Бренды по названию

Популярные бренды

FMI GWN10A, Инструкция по технике безопасности и установке

Результаты поиска

Содержание GWN10A

Отзывы:

Похожие инструкции для GWN10A

Бренды по названию

Популярные бренды