manualshive.com logo in svg

FMC Technologies Smith Meter microFlow.net Liquid, Руководство пользователя

Поделиться
Скачать
FMC Technologies Smith Meter microFlow.net Liquid Скачать руководство пользователя страница 7

Issue/Rev. 0.1 (9/13) ║  MNFL003 • Page 7

microFlow.net Liquid Modbus Communications Manual 

 

 

 

 

 

Introduction

  Mode

  –  dependent  on  EIA  232/EIA  485  wiring  configuration.  Must  match 

 

 

 

the master device.

•  Return to the Main Menu by pressing the <Clear> key.

 

1.5 

Configuring the microFlow.net Liquid for Modbus Communications via  

 

 

TCP/IP (Ethernet or SLIP)

•  Press <Enter> at the Ready screen to access the Main Menu
•  From the Main Menu, select Program Mode Menu and press <Enter>
•  Enter the Access Code when prompted and press <Enter> 
•  From the Program Mode menu, select Comm. Directory and Press <Enter>
•  Select Host Interface and press <Enter>
•  From the Host interface Menu set the following items:

Host Interface

IP Address: 192.168.0.1

Net mask: 255.255.255.0

Gateway: 192.168.0.10

Ethernet Control: Poll and Program

-->Comm Link: Level 3

•  Return to the Main Menu using the <Clear> key
To access Modbus/TCP on microFlow.net Liquid – connect to the standard Modbus/

TCP port 502 via the Ethernet port or  a serial port configured for SLIP.

Содержание Smith Meter microFlow.net Liquid







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды