FM HARBIL 24018, Инструкция пользователя

Страница: 25 / 81

TROUBLE-SHOOTING CHART
5G Paint Mixer Instruction Manual 25
The top plate does not
move in a downward direc-
tion.
for loose/broken wire in the DC
motor cable.
• Reconnect loose wire or
replace broken wire.
START switch mechanism on the
control panel for a loose connec-
tion.
DC motor.
May be problem with printed circuit
board.
• Reconnect loose wire or
replace broken wire.
• Tighten connections at the
START switch.
• Replace START switch
mechanism.
• Using volt meter, measure
voltage at DC motor or
call Customer Service.
• Replace DC motor.
• Call Customer Service.
• Replace printed circuit
board.
The top plate does not
move in an upward direc-
tion.
for voltage at the DC motor.
for broken wire in the DC motor
cabling.
• Use voltage meter or
contact Customer Service
for assistance.
• Replace broken DC motor
cabling.
for problem with the DC motor.
• Contact Customer
Service.
• Replace DC motor.
for problem with the UP switch
mechanism on the control panel.
• See wiring schematic and
test with volt meter.
• Replace the UP switch
mechanism.
May be problem with printed circuit
board. • Call Customer Service.
• Replace printed circuit
board.
Paint mixer runs before the
top plate clamps on the
container.
binding of the top plate.
May be problem with printed circuit
board.
• Clean and oil lead screws.
• Call Customer Service.
• Replace printed circuit
board.