Operating instructions TSM-21
Status as of 12 / 2021
Page 15
6 Maintenance and cleaning
The control works maintenance-free.
The safety inspection in acc. with DIN VDE 0701-0702 is to be performed annually.
Pull out the mains plug before cleaning the housing of the device with liquids.
7 Disposal
The device must not be disposed of in the normal household waste.
Users are obligated to bring old devices to a disposal point for old electrical and
electronic devices. The separate collection and proper
disposal of your old devices helps to conserve natural resources and
ensures recycling, which protects human health and the environment.
Information about where you can find disposal points for your old devices can be obtained from your city
administration or local waste disposal facility.
8 CE conformity
The motor control device TSM-21 is marked with the CE marking and therefore meets
the relevant European directives.
The company fimotec-fischer GmbH & Co. KG herewith confirms that this device
complies with the following directives:
EN 61000-6-3 and EN 61000-6-2 according to EU directive 2014/30/EU "Electromagnetic compatibility"
The declaration of conformity is archived at the manufacturer.
9 Service
If you have any questions or problems, please contact the supplier directly.
If you have any questions or problems, please contact the supplier directly.
Manufacturer: fimotec-fischer GmbH & Co.KG:
Tel.: 0049-7424-884-0
Note:
Please keep the following information ready, since otherwise service cannot be provided:
- Your company with address
- Your name and contact data, such as telephone number and e-mail address
- Complete designation of the device
- Serial number (FBxx-xxxx-xx or HW20xxxx)
- The direct supplier of your device or machine in which the device is integrated.
