Operating instructions TSM-21
Status as of 12 / 2021
Page 12
Malfunction
(t
malfunction
)
Trimmer P5
Switch-on delay, malfunction 35..180 s
Switch-on delay
(t
belt
)
Trimmer P4
Switch-on delay, sensor input signal (level sensor) 0..45 s
Drive pause
(t
pause
)
Trimmer P3
Pause drive (clock mode) 0.5..15s
Drive runs continuously:
The level sensor does not detect a workpiece in the subsequent machine and switches the drive on after
the time t
belt
has elapsed. The drive runs until the level sensor detects a workpiece and switches off the
drive.
Drive runs cyclically:
The level sensor does not detect a workpiece in the subsequent machine and switches the drive on after
the time t
belt
has elapsed. Switch-on time, drive 1.0 s or 2.5 s, pause time t
pause
0.5..15 s.
Malfunction:
After the switch-on delay t
belt
has elapsed, the switch-on delay malfunction t
malfunction
starts. If the level
sensor is not actuated by a workpiece, t
malfunction
runs off and the drive is switched off. The +24V=
transistor output (malfunction) is actuated.
The malfunction is acknowledged with the RESET button on the front panel.
