FlyTek CLICK PRO, Руководство по эксплуатации и обслуживанию

Страница: 17 / 22

After switching on the coffee machine with the general power switch (ref. K), wait about two minutes for
the coffee group to reach optimum operating temperature and thus be ready for use.
Once this time has elapsed, operate the pod-press lever (ref. F) lifting it upwards. Insert a pod into the
pod holder and gently lower the lever until it clicks into place.
Place a cup under the coffee spout (ref. B) and press one of the three keys (short coffee, long coffee or
manual start/stop) on the corresponding control panel (ref. D). For example, if you want to prepare a short
coffee, you have to press key 0 on the control panel:
HOW TO MAKE COFFEE
17
Turn on the machine by pressing the general power switch (ref. K) located at the bottom on the right side
of the machine. This switch only activates the coffee brewing unit. In order to also use the boiler for steam
production, it is necessary to activate the second switch (ref. C).
POWER ON
POWER GRID CONNECTION
The supply voltage of the machine cannot be modified by the user. Before
connecting the device to the power grid, check that the mains voltage
corresponds to the machine’s supply voltage indicated on the identification
plate.
The coffee spout is located on the front side of the machine.
COFFEE SPOUT (ref. B)
While the machine is dispensing coffee, do not touch the spout and do not
expose your face to the hot parts of the machine (danger of burns). The
heating surfaces of the machine are subject to residual heat even after use!
If the external power cable of this device is damaged, it must be replaced by a special cable provided by
the Manufacturer or by the Customer Service.
0 1 2