FLYSURFER EXTACY, Руководство пользователя

Страница: 29 / 44

29
12. Packing and storing your kite
Weigh down the upwind wingtip with something heavy (e.g. sand) and open the
zippers in the middle between the valves.
Now, pull the safety-line all the way (Picture 1) and start winding the lines in the
following way. Always wind up the flying-lines in a figure of eight around the winders
on the bar until you get to the pulleys of the bridle-lines. Now secure the lines with a
half hitch and wrap (if you haven’t done so already) the safety around the bar.
Take the downwind wingtip and place it on top of the weighed down wingtip. Throw
the lines inside the kite, so that you can place the bar on top of the two wingtips and
start rolling the kite all the way around the bar.
Important: Never place the bar on top of the kite’s underside, (where all the bridle-
lines are attached) as this can quite easily result in knotted and tangled bridle-lines.
Now simply fold over the flexible ends of the kite which overhang the bar and put it in
its bag
Info: FLYSURFER materials are extremely robust; therefore you won’t encounter
any problems when rolling up the wet kite-bar.
The salt from the salt-water is no problem for your kite and lines during your holiday.
After the holiday, you should dry the kite properly. You don’t have to wash out the
salt-water.