To load a saved model to the T6 click “
Open
”. In the Open window select
the desired saved model file and click “Open”(
see illustration 4
). If the Tx is
already connected to T6config the file is automatically uploaded to the Tx.
Illustration 5: Aircraft Type window
To select a model type click “
Type
”. In the type window (
see illustration 5
) there
are four choices:
1.
ACRO (airplane)
2.
HELI-120
3.
HELI-90
4.
HELI-140
In this manual only ACRO (airplane) will be used. Select “ACRO” to begin
programming your model.
