DR (Dual Rates)
Dual rates can be programmed by clicking the “
DR
” button. In the DR
window only CH1, CH 2, and CH 4, can be programmed with dual rates (
see
illustration 10
). There are parameters for
DR On
and
DR Off
. The parameters can
be set from 0% - 100%. In order for dual rate to be active you must assign either
SW. A or SW. B for
DR (dual rates)
in the “
Switch Program
” menu for SW. A or
SW. B. Dual rates are useful for limiting the travel of the control surfaces on your
model. A good starting point is 50%.
Illustration 10: Dual Rates window
Help
The “
Help
” button is useless.
