Fault Finding Hints
Fails to Operate
1
Is the Power Turned On?
2
Check the fuse in the plug, if blown replace.
3
Fuse continues to blow?
Immediately disconnect from the mains elec-
tricity supply and consult your local approved
Service Centre.
Poor Flotation
1. Disconnect from the mains electricity supply.
2. Clean the underside of the hood and the fan
blades.
3. Raise to a higher height of cut. See Adjusting the
Cutting Height.
4. If poor flotation persists?
Disconnect from the mains electricity supply
and consult your local approved Service
Centre.
Excessive Vibration
1. Disconnect from the mains electricity supply.
2. Replace broken or missing plastic cutters.
3. Check plastic cutters and cutting head are fitted
correctly and securely located.
4. If vibration persists?
Immediately disconnect from the mains elec-
tricity supply and consult your local approved
Service Centre.
1.
We strongly recommend that your product is
serviced at least every twelve months, more
often in a professional application.
2. Always use genuine Flymo Spare Parts.
3. Prepacked spares are available from most
Electrolux Outdoor Products stockists.
4. Your product is uniquely identified by a silver and
black product rating label.
5. If you have a problem with your machine contact
your local Approved Service Centre ensuring you
have full details of your product as described on the
product rating label.
6.
Should it be necessary for work to be carried
out by your Service Centre, it is important to
take your complete machine including cable
and any extension cables used.
A network of specialist dealers can be found in your
local Yellow Pages. To obtain service on your Flymo
product simply telephone or visit your local Service
Centre. Should you require service under the terms of
our guarantee the Service Centre will require proof of
purchase.
All of the centres listed stock genuine Flymo Spare
Parts. NOTE: Our Service Repairers act on their
own behalf and are not empowered to commit or
legally bind Electrolux Outdoor Products in any
manner whatsoever.
Service Recommendations
Environmental Information
Electrolux Outdoor Products are manufactured under an
Environmental Management System (ISO 14001) using,
where practical, components manufactured in the most
environmentally responsible manner, according to com-
pany procedures, and with the potential for recycling at
the end of the products’ life.
•
Packaging is recyclable and plastic components
have been labelled (where practical) for categorised
recycling.
•
Awareness of the environment must be considered
when disposing of ‘end-of-life’ product.
•
If necessary, contact your local authority for disposal
information.
The symbol on the product or on its packaging
indicates that this product may not be treated as house-
hold waste. Instead it shall be handed over to the appli-
cable collection point for the recycling of electrical and
electronic equipment.
By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences for
the environment and human health, which could other-
wise be caused by inappropriate waste handling of this
product.
For more detailed information about recycling of this
product, please contact your local council office, your
household waste disposal service or the shop where
you purchased the product.
