3.
Use the arrow buttons and the OK button to select
the day.
4.
Use the left arrow button to select the period.
5.
Push the OK button.
6.
Calculate the suitable operating hours. Refer to
Make an estimate of the necessary operating time
on page 22
.
7.
Enter the time with the arrow buttons. The product
can cut the grass 1 or 2 periods each day.
8.
If the product must not cut grass on a specified
day, unselect the box adjacent to the 2 time
periods.
3.10.3.3 Make an estimate of the necessary operating
time
If the work area is less than maximum product capacity,
the schedule must be set to decrease the wear on the
lawn and the product. The product has a maximum
cutting time each day. You can set the operating time of
the product in the schedule. The operating time includes
cutting, searching and charging. The operating time can
be different because of many reasons, for example the
layout of the work area, the grass growth and age of the
battery. When the product has operated to the maximum
cutting time in a day, the message
Today's mowing
complete
is shown in the display of the product.
The recommended operating times for some work area
examples are shown in the table below. If the result is
not satisfactory, increase the operating time.
Area, m
2
Recommended operating
time, h
250
6-7
500
13-15
750
21-22
3.10.3.4 To copy the schedule setting
1.
page 21
.
2.
Use the arrow buttons and the OK button to move
through the menu structure
Schedule > Advanced
> Overview > Copy
.
3.
Use the arrow buttons and the OK button to copy
the schedule setting. You can copy the schedule
settings day to day or for the full week.
3.10.3.5 To reset the schedule setting
You can remove all schedule settings and use the
factory setting.
1.
page 21
.
2.
Use the arrow buttons and the OK button to move
through the menu structure
Schedule > Advanced
> Overview > Reset
.
a)
Push the arrow buttons to select
Current
day
to only reset the current day to factory
settings.
b)
Push the arrow buttons to select
All week
to
reset all schedule settings to factory settings.
3.
Push the OK button.
3.10.4 LawnSense
LawnSense
automatically adjust the cutting time to the
growth of the grass. The product is not permitted to
operate more than the schedule settings.
Note:
When using
LawnSense
, it is recommended
to make as much operating time as possible available
for
LawnSense
. Do not restrict the schedule more than
necessary.
The first operation of the day is set by the schedule
settings. The product always complete 1 mowing cycle,
and then
LawnSense
selects if the product will continue
to operate or not.
Note:
The
LawnSense
is reset if the product does not
operate for more than 50 hours, or if a
Reset of all user
settings
is done.
LawnSense
is not changed if a
Reset
of schedule settings
is done.
3.10.4.1 To set the LawnSense
1.
page 21
.
2.
Use the arrow buttons and the OK button to move
through the menu structure
LawnSense > Use
LawnSense
.
3.
Push the OK button to select the
LawnSense
.
4.
Push the BACK button.
22 - Installation
1392 - 007 -
