If any part is found to be defective due to faulty manufac-
ture within the guarantee period, Husqvarna UK Ltd.,
through its Authorised Service Repairers will effect the
repair or replacement to the customer free of charge pro-
viding:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty
adjustment by the user.
(d) The failure has not occurred through fair wear and
tear.
(e) The machine has not been serviced or repaired,
taken apart or tampered with by any person not au-
thorised by Husqvarna UK Ltd..
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
*
This guarantee is additional to, and in no way dimin-
ishes the customers statutory rights.
Failures due to the following are not covered, therefore it
is important that you read the instructions contained in
this Operator's Manual and understand how to operate
and maintain your machine:
Failures not covered by guarantee
*
Replacing worn or damaged blades
*
Failures as a result of not reporting an initial fault.
*
Failures as a result of sudden impact.
*
Failures as a result of not using the product in accor-
dance with the instructions and recommendations
contained in this Operator's Manual.
*
Machines used for hire are not covered by this guar-
antee.
*
The following items listed are considered as wearing
parts and their life is dependent on regular mainte-
nance and are, therefore not normally subject to a
valid warranty claim: Blades, Belt, Electric Mains
cable.
*
Caution!
Husqvarna UK Ltd. does not accept liability under
the warranty for defects caused in whole or part, di-
rectly or indirectly by the fitting of replacement parts
or additional parts that are not either manufactured
or approved by Husqvarna UK Ltd., or by the ma-
chine having been modified in any way
Guarantee & Guarantee Policy
Husqvarna UK Ltd. are manufactured under an Environmental
Management System (ISO 14001) using, where practical,
components manufactured in the most environmentally re-
sponsible manner, according to company procedures, and
with the potential for recycling at the end of the products’ life.
•
Packaging is recyclable and plastic components have
been labelled (where practical) for categorised recy-
cling.
•
Awareness of the environment must be considered
when disposing of ‘end-of-life’ product.
•
If necessary, contact your local authority for disposal in-
formation.
The symbol on the product or on its packaging indi-
cates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic
equipment.
By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the envi-
ronment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
For more detailed information about recycling of this prod-
uct, please contact your local council office, your house-
hold waste disposal service or the shop where you
purchased the product.
Environmental Information
Replacement Parts
Blade :- EG300, EG300V
Reference no.: FLY004
Part no.: 512762990
Blade :- EG330, EG330VX
Reference no.: FLY027
Part no.: 511932390
