Removing and fitting the Blade and Fan
Switch off and remove the plug from the mains.
Removing the Blade and Fan. USE GLOVES.
1. To remove the blade bolt, hold the fan firmly and with
the spanner provided loosen the blade bolt by turning it
anti-clockwise (L).
2. Remove the blade bolt, blade, spacers and fan.(M)
3. Inspect for damage and clean as necessary.
•
Renew your metal blade after 50 hours mowing or 2
years whichever is the sooner - regardless of condition.
If the blade is cracked or damaged replace it with a new
one. Never use a blade bolt if the insulated head is
damaged cracked or missing.
Fitting the Blade and Fan. USE GLOVES.
1. Ensure the fan (M4) is located correctly.
2. Place the spacers (M3) onto the fan ensuring the pegs
have located into the holes.
3. Place the blade (M2) onto the spacers ensuring the text
‘GRASS SIDE’ (M5) will be facing the grass when the
product is in the mowing position. Ensure the pegs
have located into the holes on the blade and that the
blade is positioned as illustrated in Figure M
4. Place the blade bolt (M1) through the centre hole of the blade.
5. Tighten down clockwise by hand.
6. Hold the fan firmly and tighten the blade bolt with the
spanner provided.
1
2
4
3
M
5
Caring for your Lawnmower
Cleaning
•
IMPORTANT: It is very important that you keep your
lawnmower clean. Grass clippings left in any of the air
intakes or under the deck could become a potential fire
hazard.
•
USE GLOVES
Switch off and remove the plug from the mains before
cleaning.
It is recommended that you clean your lawnmower
straight after mowing while the grass is still wet.
1. Remove grass from under the deck with the span-
ner/scraper tool. (N)
2. Using a soft brush - remove grass clippings from all air
intakes, the grassbox and the grassbox vision window.
(P & Q)
3. Clean the impeller inlet with a soft brush. (R)
4. If jammed lever the roller out of position and clean with
a soft brush.(S).
5. Wipe over the surface of your lawnmower with a dry
cloth. (T)
•
IMPORTANT: Never use water for cleaning your lawn-
mower. Do not clean with chemicals, including petrol,
or solvents - some can destroy critical plastic parts.
N
R
P
T
S
Q
