Flymaster GPS SD, Руководство пользователя

Страница: 47 / 56

5 RouteDenition
In this section we will present an example of how to set a task in your GPS SD .
5.1 Route Denition
Consider the route detailed in Table 5.1 .
Table 5.1: Route example
Cylinder type Waypoint name
WAYPOINT T01
WAYPOINT W03
WAYPOINT W06
5.2 Setting up the route
Start by deleting any existing route on the GPS. Then, add to the route, in the right order: T01; W03;
W06. The GPS will automatically assume T01 as the takeo since it is the rst waypoint on the list. The
completed route should look like in Figure 5.1 .
Figure 5.1: Route example
After the above procedure the route is set. Going back into the Flight Mode Screen, by pressing MENU
bottom will automatically activates the route, and starts navigation.
Warning: After the route is edited navigation will be restarted at the beginning of the
route.
46