Flymaster GPS SD Скачать руководство пользователя страница 41

Страница: 41 / 56

Table 4.4: Language/Units Menu Options

Function

Description

Language

Denes the interface language.

Alti. Units

Altitude Units. Altitude can be show in Meters, or Feet.

Roc. Units

Rate of Climb Units. ROC can be show in m/s, or 10 x Feet/ min

Dist. Units

Distance units can be in Km, or Miles.

Speed Units

Speed Units can be in Km/h, Miles/h, or Knots.

Temperature

Temperature units can be Celsius or Farenheit.

Coords.

Coordinates format. These can be either:

DD°MM'SS?

DD°MM.mmm'

DD.dddd

UTM

4.7.8 Device Settings

This menu option allows the user to execute some recovery functions. A short description of the available

options is shown in Table

4.5

Table 4.5: Device Settings

Function

Description

Factory Settings

Reset all parameters to the default factory values. This will not

change the layout to the factory default layout. Care should be

taken because all changes made by the user are lost.

Reset now

Makes a hardware reset to the instrument. The result is the same

as the one presented in Section

1.5

Auto-o

If set to Yes the GPS SD turns o if the GPS speed is less than

5 km/h, and integrated vario less than +-1.5 m/s, for more than

30 seconds.

4.7.9 RF Probes

The RF Probes menu option allows the user to pair up any of the Flymaster wireless devices including

the M1 and Heart-G to the GPS SD . Pairing is performed automatically. When ENTER is pressed the

GPS SD will look to see what wireless devices are around and it will shows these on the screen (see Figure

4.28

). Devices are identied by their name (e.g. M1, TAS) and serial number. Devices can be selected

using the UP, or DOWN keys. For the selected (highlighted) device the pairing state is shown on the

bottom of the screen. To pair a device the state should be changed from No to Yes. Once paired the GPS

SD will always automatically connect with the wireless device. The GPS SD can be paired with several

devices.

Содержание GPS SD

























































Результаты поиска

Содержание GPS SD

Отзывы:

Похожие инструкции для GPS SD

Бренды по названию

Популярные бренды

Flymaster GPS SD, Руководство пользователя

Результаты поиска

Содержание GPS SD

Отзывы:

Похожие инструкции для GPS SD

Бренды по названию

Популярные бренды