Wing Preparation Guide lines
All FPV installations are different, but we offer
some guide lines for the Venturi EVO 2
GPS
Video TX
Receiver
There are some pre-cut slots in the
fuselage to run cables from the wing to the
autopilot /osd etc
Using the spar holes, hold the fuselage
against the wing and mark on the wing
where these slots line up. Then you can cut
slots in the wings for the servo , video tx etc
cables
Cut out the foam to accomodate your chosen
servos and FPV gear
When you are happy with this, remove the parts
and laminate the wing with 72 micron laminate
film.
