Attaching wings to fuselage
IMPORTANT !
The tube spars are a tight fit in the wings, to help
assembly, use insert the spars into the wings with
twisting action making them easier to insert when
you come to assemble the wings.
Mark each spar at the centre point
Slide the two carbon tube spars through the
fuselage, short on at the front.
Use a small amount of glue to hold the spars in
place
Bench
Run a small bead of UHU Por up each spar,
Slide the wing down the spars
Mark out where the wing will join the fuselage
and use plenty of glue.
Check the front and back of the wings for
alignment.
repeat for the other wing
