background image

                                                                                                                                                                                         5 

 

Safety Hints 

ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT SERIOUS DAMAGE TO 
THE GEAR! 

BE HIGHLY VIGILANT OF SURROUNDINGS 

Check  the  area  you  will  be  shooting  in,  before  shooting.  Make  sure  your  path  is 
clear.  Look  for  obstacles  and  note  anything  you  might  run  into  or  trip  over.  Extra 
care is also necessary when tackling stairs and other kinds of uneven ground. 

 

ALWAYS WEAR PROTECTIVE GEAR 

If you intend to shoot while moving fast or while traversing uneven terrain, do not 
hesitate to wear protective gear as knee or elbow pads, or a helmet. 

 

DO NOT SHOOT IN UNSAFE CONDITIONS 

Avoid  situations  where  one  commonly  falls  like  skis,  skates  or  running  in  muddy 
fields. 

 

ADULT SUPERVISION IS RECOMMENDED 

Minors using this product should have adult supervision. 

 

FOLLOWING THESE GUIDELINES WILL PROVIDE BETTER SHOTS AND TROUBLE-FREE 
OPERATION. 
SHOULD  YOU  NEED  ADDITIONAL  INFORMATION,  TECHNICAL  ASSISTANCE  IS      
AVAILABLE ‘ONLINE’ BY CONTACTING YOUR SALES REPRESENTATIVE. 

Содержание FLCM-RK
















Отзывы: