11
NOTE:
Make sure that your “GUIDING HAND”
and “HOLDING HAND” do not touch either
the bearing assembly or the “YOKE” during
shooting. For unconventional shots, like ones
that require aiming the camera either
straight up or down, or sideways, hold onto
the Stabilizer on the lower part of the
post, or down near the weight.
This will
allow your “GUIDING HAND” to have a
greater degree of control over the Stabilizer
while shooting erratic shots.
Low-Mode Operation
When operating Redking Stabilizer in Low-Mode, you will not be able to put your eye right up to
the eyecup on viewfinder. For doing so will cause the unit to be restricted in its ability to stabilize
and eliminate camera shake. You can either use camera’s built-in LCD Monitor or attach an exter-
nal LCD Monitor
(Not Included)
directly to the base platform of stabilizer. A 1/4”-20 monitor
mounting hole is located at both the front and back edges of Base Platform.
NOTE:
You can also attach an external LCD Monitor
(Not Included)
to the accessory shoe on top
of your Camcorder. We believe that better results are obtained when you attach monitor to
Flycam Redking Stabilizer’s base, because this way you have to look slightly down to see the
monitor and so, your feet are more visible to your peripheral vision. This makes negotiating obsta-
cles with the Stabilizer safer.
