EFC57-P/EFC-P
- User’s manual -
Installation and User
Manual, Safety Instructions and Warning Booklet
FLYBOX
13
Rev. 3.4
®
Operation instructions
4.2 OPERATION INSTRUCTIONS
The instrument can work in two modes: Automatic or Manual.
For normal operations use the “Automatic” mode; the
“Manual” mode must be used only in case of emergency or
failure of the EFCX.
NOTE:
Before using the device for the first time you must
program the four position that the EFCX store in memory and
use in Automatic mode. Follow this steps to perform the
programming:
●
Set the EFCX in “Manual” mode and move the flaps until
the limit switch are not activated.
●
●
With the device powered off turn the A/M switch in the
“Automatic” position, then press and hold the U/D switch
in the “UP” position..
●
Power on the EFCX and wait 10 seconds until the LED1
and the LED4 come on steady.
●
Release the U/D switch (LED1 and LED4 start flashing),
indicating that the device is in programming mode.
