Digital Proportional Radio Control System
16
FS-l6S
This function controls screen brightness and volume for the system.
7.7 Bri./Sound
Setup:
Represents brightness ranging from 0-100%.
Represents volume from 0-100%.
Touch
[Bri./Sound]
in the system menu. Touch the sliders to change
screen brightness and volume.
This function resets all settings back to default.
To reset the system touch
[Factory Reset]
in the main menu then
when prompted touch "Y" for yes.
•
Once reset all user settings will be lost.
7.8 Factory Reset
This function changes the throttle mode (Software only), for information on hardware refer to
[8.1 Throttle
Bracket Installation]
and
[8.2 Throttle Spring Installation
].
7.5 Throt Mode
Setup:
[Self centering]
:If both sticks are set to self-centreing select this throttle mode.
[Non self centering]:
When one of the transmitters sticks is set to non self-centering select this throttle mode.
Touch
[Throt Mode]
in the system menu then select your systems mode.
(Must match hardware setup)
This function calibrates the sticks and knobs.
7.6 Sticks Adjust
Setup:
1. Enter stick adjust in the menu.
2. Move the sticks and knobs though their entire range of motion on each axis. To save touch the back icon.
If you can not go back it means that one or all of the sticks and knobs have not moved their full range of
motion.
3. Go to the servo display screen to check the calibration.