Digital Proportional Radio Control System
10
FS-l6S
3. Touch
[Switch]
to enter the switch selection sub menu. If no switch is selected you can press
[Start]
to start
the time and
[Stop]
to stop it.
5.3 Fly Mode
Setup:
This mode can store settings that can be recalled by
toggling a switch.
There are several options available:
A: Stores the channel used by the flight controller.
1. Touch the box to the right of the desired
channel.
2. Select the correct decimal and use the up and
down arrow keys.
B: Stores the first selected activation switch.
C: Stores the second selected activation switch.
D: This number represents the currently selected
mode. The name beside the mode number can
be changed.
Touch the box, use the onscreen keyboard to enter
a new name.
The fly mode function can store up to 9 different fly modes which can activated using a switch.
Different fly modes are assigned using combinations of switches. A 2-way switch will enable you to switch
between modes 1 and 2,two 2-way switches will enable you to 4 fly modes, two 3-way switches will allow you
to switch between all 9 fly modes. Use the table below to see which positions are assigned to each mode.
SwB Position
SwC Position
Mode
Up
Up
1
Up
Middle
2
Up
Down
3
Middle
Down
4
Middle
Middle
5
Middle
Up
6
Down
Up
7
Down
Middle
8
Down
Down
9
B
D
C
E
A
E: Changes the output for each mode.
1. Touch the box to the right of the desired
channel.
2. Select the correct decimal and use the up and
down arrow keys.