TRIKE-FLASH OWNER’S MANUAL REL . 2.0
___________________________________________________________________________
©
Copyright by
FLY
Products
s.r.l.
Page
6
Introduction to frame drilling for engine mounting
We deliberately omitted the frame drilling for mounting our GOLD 130 homologated engine to allow
the mounting of a different engine model.
You must carry out the drilling operation in any case, follow the next indications:
Necessary tools to operate:
-
Drill
-
Metal drill points Ø 10 mm and Ø 6,5 mm.
-
Hammer
-
Rapid glue
ASSEMBLING “TRIKE-FLASH”
For easier storage and transportation the Trike-flash can be folded to the minimum size.
Assembly instructions:
Unscrew the red plastic wing nut and hook
rear wires
