Flux F 550, Оригинальное руководство по эксплуатации

Страница: 28 / 80

28/80 Original operating instructions Eccentric worm drive pump F 550
S … TR
and Sanitary pump F 56
0 S … TR
ENGLI
SH
Attention!

Make sure that the operator has read and understood the operating
instructions.

Check the motor, mains plug, pump and hose regularly for operating
safety.
Danger from splashing liquids!

The maximum operating pressure and the operating temperature
must not be exceeded.

High operating pressure may result in the containers or the hoses
bursting or becoming loose. Make sure that excessive pressure
does not result when filling a container.

Keep the air escaping and the displacement in mind when immer-
sing the pump in the liquid. Lower the pump carefully.

Fill carefully and at an appropriate speed to avoid leakage of the
liquid. Install appropriate splash guards for open barrels or contain-
ers.

After the filling, allow the excess to drip off the hand nozzle.
There may be liquid left in the outlet tube, which will then leak out.

Empty the pump, hose and fittings prior to removing the motor.

Remove spilled liquid from the floor and dispose of it in an environ-
mentally sound manner.
Attention!

The maximum pressure of 8 bars must strictly be observed.
Attention!

Only use couplings between motor and pump that are suitable for
use in category 2 (zone 1) and for explosion groups IIB or IIC.

The temperature class of the coupling must at least correspond to
the temperature class of the pump (e.g. pump with T4 -> coupling
T4, T5, T6).

Observe the operating and assembly instructions for the coupling
used (chapter 4).
Attention!

Risk of injury due to open drive shaft.
Never operate motors without pump!
Attention!

If the eccentric worm-drive pump is operated against a closed outlet,
an appropriate by-pass (pressure relief) valve must be used to limit
the maximum pressure.