manualshive.com logo in svg

Fluke Victoreen 190, Руководство оператора

Поделиться
Скачать
Fluke Victoreen 190 Скачать руководство пользователя страница 26

Victoreen 190 

Operators Manual 

 

  3-14 

 

 
 
 
 

If the instrument is in the Integrate Mode, press and 
hold the RESP TIME button for three seconds.  The 
integrate values should reset to zero without 
changing the response time.

 

 

f. 

Press the AUDIO button to toggle on or off the click from the speaker associated with each 
count from the detector.  The clicks from the speaker have a one to one correspondence with 
counts from the detector up to 3200 cpm.  For counts above 3200 cpm, there is a transition 
from clicks to a steady tone. 

g.  Press the ON/OFF button to turn the instrument off.  

 

 
 

If the instrument is in the Log Mode, the unit can be 
turned OFF only after all logged data has been 
read from the internal RAM using the 
communications software.  Refer to the Instruction 
Manual provided with the Model 190-1A 
Communicator for further details.

 

 

NOTE

NOTE

Содержание Victoreen 190







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды