2
TS52PRO Test Set
Users Guide
W
Safety Information
W
Warning
X
To avoid possible fire, electric shock, or personal
injury:
Read all of the safety information in the test set
Users Guide before you use the product.
Do not use test leads if they are damaged.
Examine the test leads for exposed metal and
damage to the insulation. Make sure the wear
indicator on the cords does not show. The wear
indicator is the white layer below the outer,
braided layer. Verify the continuity of the test
leads.
Do not exceed the Measurement Category (CAT)
rating of the lowest-rated individual component
of a product, probe, or accessory.
Keep your fingers behind the finger guards on
the probes.
Do not use the test set if it is damaged. Before
you use the test set, inspect the case. Look for
cracks or missing plastic. Pay particular attention
to the insulation surrounding the connectors.
Do not use around explosive gases or vapors, or
in a damp or wet environment when hazardous
voltage is present.
Under no circumstances should the line cord of
the test set be connected to any CAT II, CAT III, or
CAT IV rated circuit.
If this product is used in a manner not specified
by the manufacturer, the protection provided by
the product may be impaired.
Product Features
Liquid Crystal Display with backlight
Caller ID
DataSafe
™
in Monitor mode
Data detection and lockout in Talk mode
Data lockout override
DTMF digit grabbing
High impedance in Monitor mode
High voltage protection
Last number redial up to 23 digits
Visual ANAC mode
Microphone mute
Pause key
Reverse polarity indication
Two-way speakerphone
Receive-Only Loud Speaker
Speed dialing for ten 23-digit numbers
Tone and pulse dialing
Hook flash
Line voltage / Loop current test
Low battery indication
Relocatable belt clip
Field-replaceable belt clip, battery, and line cord
Weatherproof case
High voltage lockout in Talk mode
40 year Environment Friendly Use Period
(EFUP) under China Regulation -
Administrative Measure on the Control of
Pollution Caused by Electronic Information
Products. This is the period of time before any
of the identified hazardous substances are
likely to leak out, causing possible harm to
health and the environment.
T
Double Insulated - does not require
connection to earth ground.
~
This product complies with the WEEE
Directive marking requirements. The affixed
label indicates that you must not discard this
electrical/electronic product in domestic
household waste. Product Category: With
reference to the equipment types in the
WEEE Directive Annex I, this product is classed
as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of
this product as unsorted municipal waste.
To return unwanted products, contact the
manufacturer’s web site shown on the
product or your local sales office or
distributor.
