Thermal
Imagers
How to Install and Use Optional Lenses (Telephoto and Wide-Angle)
15
To select or change the lens in use on the Imager:
1.
Press
a
until the F3 softkey label reads
Settings
.
2.
Press the softkey labeled
Settings
.
3.
Within the Settings Menu, press
a
, labeled
Menu
,
until the F3 softkey
reads
Lens
.
4.
Press the softkey labeled
Lens
.
5.
Press the softkey labeled
Up
(
c
) or
Down
(
d
) to select the lens.
6.
Press the softkey labeled
Done
when finished.
7.
Continue adjusting other items in the Settings Menu, or quickly squeeze
and release the trigger twice to return to live view.
If you have the Display Information setting on your Imager set to
Display All
,
a
symbol appears with the wide-angle lens selection. A
symbol
appears on the lower part of the LCD with the telephoto lens selection. The
default condition is the standard lens with no indicator symbol.
W
Caution
Failure to select the proper lens on your Imager may result
in inaccurate temperature measurement values.
When finished using the optional lens, remove it from the Imager:
1.
Gently push in on the optional lens and rotate counter-clockwise until lens
disengages from Imager.
2.
Remove optional lens and replace properly with lens cap into its storage
case.
3.
Select the standard lens in the proper section of the menu system to return
to normal operation with that lens.
Note
For the best protection and longest life, always remember to store an
optional lens in its protective cases with the lens covers on.
Содержание Ti32
Страница 6: ...Ti32 TiR32 Users Manual iv ...
Страница 40: ...Ti32 TiR32 Users Manual 34 ...