background image

Ti32, TiR32  

Users Manual 

How to Contact Fluke 

To contact Fluke, call one of the following telephone numbers: 

 

USA: 1-800-760-4523 

 

Canada: 1-800-36-FLUKE (1-800-363-5853) 

 

Europe: +31 402-675-200 

 

Japan: +81-3-3434-0181 

 

Singapore: +65-738-5655 

 

Anywhere in the world: +1-425-446-5500 

Or, visit Fluke's website at 

www.fluke.com

To register your product, visit 

http://register.fluke.com

To view, print, or download the latest manual supplement, visit 

http://us.fluke.com/usen/support/manuals

Safety Information 

Use the Imager only as specified in this manual. See Table 1 for a list of 
symbols used on the Imager and in this manual. 

Warning

 identifies hazardous conditions and actions that could cause 

bodily harm or death. 

Caution

 identifies conditions and actions that could damage the Imager or 

cause permanent loss of data. 

W

 Warning 

To avoid a burn hazard, remember that highly reflective 
objects will result in lower than actual temperature 
measurements. See Emissivity information later in this 
manual for more information. 

Do not use in a manner other than specified in this manual 
or the protection provided by the equipment may be 
impaired. 

To avoid injury from explosion, chemical burns, or fire, 
follow all battery care and charging instructions in this 
manual. 

Содержание Ti32









































Отзывы: