Fluke ProSim 4, Начало работы

Страница: 25 / 32

Vital Signs Simulator
Maintenance
13
Battery Maintenance
For peak battery performance, charge the Product to
maximum charge once a month. If the Product is not to
be used for more than a month, keep it connected to the
charger.
Note
To get the specified performance, use the
specified battery charger that comes with this
Product.
When the battery gets low a low battery message shows
in the display.
When the battery discharges to a low level threshold, a
warning shows in the display to indicate the NIBP function
is disabled.
How to Charge the Battery
The battery charge level is shown in the upper right
corner of the display.

Shows when the ac/dc power
supply is connected

Shows the battery level when the
Product operates on the battery
The battery can be charged while it is in or out of the
Product. The charge rate is slower when the Product is
energized and the battery charger is on. To charge the
battery:
1. As shown in Figure 4, connect the ac/dc power
supply to the power connector on the battery pack.
2. Connect the ac/dc power supply to a power source.
The battery charge LED on the battery pack shows red or
green when the ac/dc power supply is connected to the
battery pack. When the LED is green, the battery is
charged.
When you have two or more battery packs, you can
charge one battery externally while you use the other to
energize the Product.