Fluke ProSim 4, Начало работы

Страница: 22 / 32

ProSim™ 4
Getting Started
10
How to Turn On the Product
Push

on the left side panel to turn on the Product.
Push

for three seconds to turn off the Product.
When the self test is complete and no errors are sensed,
the Home screen in Figure 3 shows in the display.
gne102.jpg
Figure 3. Home Screen
All Product simulations and tests are set through the
controls on the Home screen.
How to Change the Display Language
To change the language used in the display:
1. From the home screen shown in Figure 3, touch
the More softkey.
2. Touch the Setup control.
3. Touch the Language control.
4. Touch

or

to scroll through the languages.
5. Touch the Save softkey to set the language and
go back to the Setup screen.
Touch the Cancel softkey to go back to the Setup screen
and not change the language.