Fluke OptiView III Series, Руководство по началу работы, Страница: 56 / 58

21
Workgroup Analyzer
Safety and General Specifications
Safety and General Specifications
Table 3. General Specifications
Weight 1.63 kilograms (3.6 lbs)
Dimensions 4.1 x 21.1 x 32.8 cm (1.6 x 8.3 x 12.9 in), one half of a standard 19 in
rack mount width
AC input 85 to 265 VAC; 47/63 Hz; 25 watts
Network Analysis Interface 10/100/100 BASE-T (RJ-45) + SFP (100/1000 fiber)
Network Analysis interface LEDs Link, Utilization, Transmit, Collision, Errors
Capture Memory 480 Mbytes
Serial Configuration Port Serial RS-232 (9-pin male)
Management Port 10/100/1000BASE-T (RJ-45) Ethernet
Shock and vibration Meets requirements of MIL-PRF-28800F for Class 3 equipment
Laser
*
Class 1 Laser Product, complies with 21 CFR 1040.10 & 1040.11,
CFR(J), and EN60825-1:1994/A1:1997/A2:2002
Operating Temperature 10
°
C to 30
°
C (50
°
F to 86
°
F) with up to 95% Relative Humidity
10
°
C to 40
°
C (50
°
F to 104
°
F) with up to 75% Relative Humidity
Non-Operating Temperature-20
°
C to +60
°
C (-4
°
F to +140
°
F
)
Connection to public telephone network The analyzer network interfaces are NOT FOR CONNECTION TO
PUBLIC TELEPHONE SYSTEMS. The analyzer should only be connected
to the public phone network through regulatory agency compliant
modem devices.
Safety
)
Complies with CSA C22.2 No. 950 Canadian standards, and UL
1950 (US standards)
P
Complies with European Union directive EN60950 2
nd
edition.
EMC
P
Complies with EN61326 Class A.