Battery Installation
XW
Warning
To avoid electric shock or personal injury:
•
Remove Probe from energized circuits before
opening battery door.
•
Never operate the unit without the battery cover
installed.
The Probe requires two AA/MN1500/LR6 alkaline batteries for
operation. The battery compartment is accessed from the rear
end of the electronic enclosure.
The batteries must be replaced when the LED is lit continuously
or when it fails to light up. Ensure that the Probe is away from
any current carrying conductor and also that the output is
disconnected from other equipment.
To install the battery:
1.
Use a coin or a similar tool to turn the battery lock (¼
turn) until the dot aligns with the unlock symbol.
2.
Remove the battery cover.
3.
Install the batteries ensuring that correct polarity is
observed.
4.
Replace the battery cover and turn the battery lock until
the dot aligns with the lock symbol.
External Power Supply
An optional Class II external power supply is available from
Fluke. The power supply is designed to ensure that the Probe
continues to meet its specified safety standards. The usage of a
power supply from another vendor is not recommended.
XW
Warning
To avoid electric shock or injury, remove Probe and
all other connections from energized circuits before
connecting external power supply to the instrument.
Measuring Current
XW
Warning
•
To avoid electric shock or injury, read Safety
Instructions before operating this product
•
Ensure that the conductor to be tested is de-
energized
To measure current:
1.
Connect the output of the electronics to the input of an
oscilloscope or other data recording device.
