•
Do not exceed the Measurement Category (CAT) rating of
the lowest rated individual component of a Product, probe,
or accessory.
•
High voltages and currents can be present in adjacent
circuits under test.
•
Do not use the Product above its rated frequency.
•
Use the Product only on insulated conductors. Use caution
around bare conductors or bus bars. Do not touch the
conductor.
Symbols
The table below is a list of the symbols used on the Probe and in the
instructions.
Symbol Description
W
WARNING - RISK OF DANGER. Consult user
documentation.
X
WARNING. HAZARDOUS VOLTAGE. Risk of
electric shock.
-
Do not apply around or remove from uninsulated
hazardous live conductors without taking additional
protective measures.
T
Double Insulated
Measurement Category II is applicable to test and
measuring circuits connected directly to utilization
points (socket outlets and similar points) of the low-
voltage MAINS installation.
Measurement Category III is applicable to test and
measuring circuits connected to the distribution part
of the building’s low-voltage MAINS installation.
Measurement Category IV is applicable to test and
measuring circuits connected at the source of the
building’s low-voltage MAINS installation.
P
Conforms to European Union directives.
)
Certified by CSA Group to North American safety
standards.
Conforms to relevant Australian safety and EMC
standards.
~
This product complies with the WEEE Directive
marking requirements. The affixed label indicates
that you must not discard this electrical/electronic
product in domestic household waste. Product
Category: With reference to the equipment types in
the WEEE Directive Annex I, this product is classed
as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this
product as unsorted municipal waste.
