Fluke i310s Скачать руководство пользователя страница 8

i310s English Instruction Sheet 

Page  

LIMITED WARRANTY AND LIMITATION OF LIABILITY 

This Fluke product will be free from defects in material and 
workmanship for one year from the date of purchase. This 
warranty does not cover fuses, disposable batteries, or damage 
from accident, neglect, misuse, alteration, contamination, or 
abnormal conditions of operation or handling. Resellers are not 
authorized to extend any other warranty on Fluke’s behalf. To 
obtain service during the warranty period, contact your nearest 
Fluke authorized service center to obtain return authorization 
information, then send the product to that Service Center with a 
description of the problem. 

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER 
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR 
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT 
LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM 
ANY CAUSE OR THEORY. Since some states or countries do 
not allow the exclusion or limitation of an implied warranty or of 
incidental or consequential damages, this limitation of liability 
may not apply to you. 

 

Fluke Corporation 
P.O. Box 9090 
Everett, WA  98206-9090 
U.S.A. 

Fluke Europe B.V. 
P.O. Box 1186 
5602 BD Eindhoven 
The Netherlands 

11/99 

 

Содержание i310s









Отзывы: