i310s English Instruction Sheet
Page 2
Safety Instructions
Please read this section carefully. It will make you familiar with
the most important safety instructions for handling your product.
In this instruction sheet, a Warning identifies conditions and
actions that pose hazard(s) to the user. A Caution identifies
conditions and actions that may damage the calibrator or the test
instruments.
WX
Warning
The Clamp may only be used and handled by
qualified personnel. To avoid personal injury, follow
these precautions:
•
To avoid electric shock, use caution during
installation and use of this product; high
voltages and currents may be present in circuit
under test.
•
Do not use the Clamp if damaged. Always
connect to display device before it is installed
around the conductor.
•
Always ensure the Clamp is removed from any
live electric circuit, and leads are disconnected
before removing the battery cover.
•
Use the Clamp only as specified in the
operating instructions; otherwise the safety
features may not protect you.
•
Adhere to local and national safety codes.
Individual protective equipment must be used
to prevent the shock and arc blast injury where
hazardous live conductors are exposed.
•
Do not hold the Clamp anywhere beyond the
tactile barrier.
•
Before each use, inspect the Clamp. Look for
cracks or missing portions of the housing or
output cable insulation. Also look for loose or
weakened components. Pay particular attention
to the insulation surrounding the jaws.
•
Use caution when working with voltages above
60 V dc, 30 V ac rms or 42 V ac peak. Such
voltages pose a shock hazard.
•
Use of this equipment is designed to protect
against transients in equipment in fixed
equipment installations, such as distribution
panels, feeders and short branch circuits, and
lighting systems in large buildings.
