conductors are exposed.
• Remove the input signal before you clean the Product.
• Do not use cable assembly if they are damaged. Examine
the cable assembly for damaged insulation, exposed
metal. Check cable assembly continuity.
•
Measure a known voltage first to make sure that the
Product operates correctly.
•
Do not use the Product around explosive gas, vapor, or in
damp or wet environments.
• Do not use the Product if it is altered or damaged.
• Do not use cable assembly if there is damage. Examine
the cable assembly for damaged insulation and measure
a known voltage.
• Only connect the Product to the instrument and the
charging stations as indicated in the Specification section.
• Use the Product within the operating range only. The
operating range is specified in the Specification section.
Symbols
Symbol
Description
W
WARNING. RISK OF DANGER.
X
WARNING. HAZARDOUS VOLTAGE.
Risk of electric shock.
Consult user documentation.
Measurement Category II is applicable to test and
measuring circuits connected directly to utilization points
(socket outlets and similar points) of the low-voltage
MAINS installation.
This product complies with the WEEE Directive and its
marking requirements. The affixed label indicates that
you must not discard this electrical/electronic product
in domestic household waste. Do not dispose of this
product as unsorted municipal waste. For information
about take-back and recycling programs available in
your country, see the Fluke website.
Product Disposal
Dispose of the Product in a professional and environmentally
appropriate manner:
•
Delete personal data on the Product before disposal.
• Put the Product in the electrical waste.
