background image

CNX v3000 

Calibration Manual 

Specifications 

Accuracy is specified as 

±

 ([% of reading] + [number of least significant digits] ). All ranges are autoranging. Accuracy is 

specified from 5 % to 100 % of  the range obtained by autoranging, from 18 

°

C to 28 

°

C. 

AC Voltage 

Range  

Resolution 

Accuracy 

[1][2][3]

 

45 Hz to 500 Hz 

500 Hz to 1 kHz 

6.000 V 

0.001 V 

 

1.0 % + 3 

 

2.0 % + 3 

60.00 V 

0.01 V 

600.0 V 

0.1 V 

1000 V 

1 V 

[1] 

Crest factor of 

3 at full scale to a maximum of 4000 counts, decreasing linearly to crest factor 

1.5 at full scale. 

[2] 

For non-sinusoidal waveforms, add -(2 % of r 2 % full scale)  typical, for crest factor to a maximum of 3. 

[3]     Do not exceed 10

6

 

V-Hz 

General 

LCD w/Backlight .................................................... 3 ½ digits, 6000 counts, 4/sec update rate 
Log Rate/Interval ................................................... adjustable by PC from 1 second to 1 hour, default is 1 minute 
Memory ................................................................. Record up to 65,000 readings 
Battery Type .......................................................... 2 AA, NEDA 15 A, IEC LR6 
Battery Life ............................................................ 400 hours 
RF Communications ............................................. 2.4 GHz ISM Band 
RF Communication Range.................................... 20 m (65.61 ft) 

Operating Temperature ......................................... -10 

°

C to +50 

°

C, (14 

°

F to 122 

°

F) 

Storage Temperature ............................................ -40 

°

C to +60 

°

C, (-40 

°

F to 140 

°

F) with batteries removed 

Operating Humidity ............................................... 90 % from 0 

°

C to 35 

°

C, 45 % to 40 

°

C, 45 % to 50 

°

 

(90 % from 32 

°

F to 95 

°

F, 45 % to 104 

°

F, 45 % to 122 

°

F) 

Operating Altitude…………………………………….2,000 m (6561.68 ft) 
Storage Altitude………………………………………12,000 m (39370.079 ft) 
Ingress Protection (IP) rating ................................ IP42 
Radio Frequency Certification............................... FCC Part 15 Subpart C Sections 15.207, 15.209, 

15.249, FCCID : T68-FWCS IC:6627A-FWCS 

Safety .................................................................... IEC 61010-1: 600V CATIV/1000V CATIII, Pollution Degree 2 
EMC 

Applies to use in Korea only ........................... Class A Equipment (Industrial Broadcasting & Communication 

Equipment) [1] 

 

[1] This product meets requirements for industrial (Class A) 

 

electromagnetic wave equipment and the seller or user should take 

 

notice of it. This equipment is intended for use in business 

 

environments and is not to be used in homes. 

EM Environment ................................................... IEC 61236-1: Portable 

Temperature Coefficient ....................................... 0.1 X (specified accuracy)/ 

°

C (<18 

°

C or >28 

°

C) 

Size ....................................................................... (160 tall x 66 wide x 38 deep) mm

 

 

(6.3 tall x 2.6 wide x 1.5 deep) in 

Weight ...................................................................  0.255 kg (9 oz)

Содержание CNX v3000























Отзывы: