4.
Examine the Results
The tester shows multiple views of the test results (Figure 5):
WIRE MAP
: Shows the connections between the ends of
the cable under test. The tester compares the connections
to the selected
Outlet Configuration
to get a
PASS
or
FAIL
result.
PERFORMANCE
: Shows the overall result for each test that
is required by the selected test limit. To see detailed results
for a test, tap the panel.
HFO02.EPS
Figure 5. Examples of Twisted Pair Results Screens
5.
Save the Results
5-1
Tap
SAVE
if the test passed or
FIX LATER
if the test
failed.
5-2
If the
Cable ID
box shows the correct ID, tap
SAVE
.
To enter a cable ID, tap the
Cable ID
box on the
SAVE RESULT
screen, use the keyboard to enter a name for the results, tap
DONE
, then tap
SAVE
.
The tester saves the results in the
DEFAULT
project, unless you
selected a different project.
About Projects
You can set up a project to specify the settings and tests
necessary for a job, monitor the status of a job, and organize the
test results.
To start a new project, tap
PROJECT
on the home screen, tap
CHANGE PROJECT
, then tap
NEW PROJECT
. See the Users Manual
or Technical Reference Handbook for more information.
www.calcert.com
1.888.610.7664
0
5
10
15
20
25
30
