Headset jack.
PASS
LED comes on when a test passes.
TEST
LED comes on during a test.
FAIL
LED comes on when a test fails.
TALK
LED comes on when the talk function is on (see
). To
adjust the volume, press
or the button on the headset’s
microphone.
TONE
LED flashes and the toner comes on when you press
and a main tester is not connected to the remote.
LOW BATTERY
LED comes on when the battery is low.
Note
The LEDs also operate as a battery gauge when
you turn on the remote. See the Users Manual.
: Press
to use the headset to speak to the person
at the other end of the link. Press again to adjust the volume.
To turn off the talk function, hold down
.
How to Certify Twisted Pair Cabling
1.
Power the Tester
Charge the battery if necessary. Connect the ac adapter to
ac power and to the adapter connector (
) shown in Figure
1. You can use the tester while the battery charges.
2.
Select Settings
2-1
On the home screen, tap the test setup panel (see
Figure 2).
2-2
On the
CHANGE TEST
screen, tap a twisted pair test, then
tap
EDIT
.
2-3
On the
TEST SETUP
screen, tap the panels to change
settings.
2-4
To save the settings, tap
SAVE
on the
TEST SETUP
screen.
-continued-
www.calcert.com
1.888.610.7664
0
5
10
15
20
25
30
