Fluke CableAnalyzer DSP-4000 Series, Руководство пользователя

Страница: 122 / 228

DSP-4000 Series
Users Manual
5-6
Viewing, Renaming, and Deleting Test Reports
To view test reports, delete test reports, or rename the cable identification given on
a saved report, proceed as follows:
1. Turn the rotary switch to SPECIAL FUNCTIONS.
2. Press
E
to select
View/Delete Test Reports
. The
VIEW/DELETE TEST REPORTS screen appears showing the first screen of
test report labels. The reports are listed in the order saved, starting with the
oldest report in memory. Each test report label shows the date and time the
report was saved, the cable identification name, and an overall test result (pass,
fail, or warning).
3. Use
# Page Up
,
$ Page Down
, and
D U
to highlight the report
you want to view, rename, or delete.
4. Press the softkey labeled with the function you want. The softkeys function as
follows:
• ! Delete Report
: Deletes the highlighted report from memory.
• @ View Result
: Displays the overall Autotest result and
headroom value for the highlighted report. To see detailed results for a
test, press
View Result
again; then highlight the desired test and
press
E
.
To change the cable identification, press the
@ Rename Report
softkey that appears after you press
View Result
twice. Use the
softkeys to edit the cable identification. Press
S
when you are done.
To delete all of the Autotest reports stored in memory, select
Delete All
Test Reports
from the main SPECIAL FUNCTIONS menu.