Symbol
Description
Canadian Standards Association
OVERVOLTAGE (Installation) CATEGORY II, Pollution Degree 2 per IEC1010-1 re-
fers to the level of Impulse Withstand Voltage protection provided. Equipment of
OVERVOLTAGE CATEGORY II is energy-consuming equipment to be supplied from
the fixed installation. Examples include household, office, and laboratory appliances.
C-TIC Australian EMC Mark
The European Waste Electrical and Electronic Equipment (WEEE) Directive
(2002/96/EC) mark.
1.2
Safety Information
Use this instrument only as specified in this manual. Otherwise, the protection
provided by the instrument may be impaired.
The following definitions apply to the terms “Warning” and “Caution”.
•
“Warning” identifies conditions and actions that may pose hazards to the
user.
•
“Caution” identifies conditions and actions that may damage the instru-
ment being used.
1.2.1
Warnings
To avoid personal injury, follow these guidelines.
•
DO NOT
operate this unit without a properly grounded, properly polar-
ized power cord.
•
DO NOT
connect this unit to a non-grounded, non-polarized outlet.
•
DO NOT
use this unit for any application other than calibration work.
•
DO NOT
use this unit in environments other than those listed in the
user’s guide.
•
Completely
unattended operation is not recommended
for safety rea-
sons.
•
Always replace the fuse with one of the same rating, voltage and type.
•
If the instrument is used in a manner not in accordance with the equip-
ment design, the operation of the calibrator may be impaired or safety
hazards may arise.
•
Follow all safety guidelines listed in the user’s manual.
•
DO NOT
operate near flammable materials.
•
DO NOT
use fluids to clean the plate.
9135 Infrared Thermometer Calibrator
User’s Guide
2
